|
Model
|
C891-24X/K9
|
|
WAN Interfaces
|
2-port GE or 2-port SFP
|
|
LAN Interfaces
|
24-port 10-/100-/1000-Mbps managed switch (8-ports PoE capable with integrated power supply)
|
|
802.11a/g/n Option
|
No
|
|
Integrated USB 2.0/AUX/Console
|
Yes
|
|
Integrated Dial Backup
|
No
|
|
High availability and business continuity
|
● Redundant WAN connections for failover protection and load balancing
|
|
● Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP)
|
|
● Dial backup with external modem through a virtual auxiliary port
|
|
Consistent, high application performance levels
|
● The router can run multiple services simultaneously with no performance degradation
|
|
Risk mitigation with multilevel security
|
● Network perimeter security with integrated application inspection firewall
|
|
● Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption
|
|
● Enforced security policy with intrusion prevention
|
|
● Security hardware acceleration
|
|
● FlexVPN
|
|
● Next-generation encryption for secure network communications systems, reliable for the next decade
|
|
● Cisco ISR Web Security with Cisco ScanSafe, designed to prevent zero-day malware from reaching corporate networks
|
|
Feature consolidation for real estate, capital expenditures (CapEx), and management savings
|
● Supports LAN connections, both Ethernet and Wi-Fi, in one appliance. Contains an integrated 802.11n WLAN access point that supports both autonomous and unified modes, as well as an 8-port LAN switch. Management of both the wired and wireless environments is integrated
|
|
Unified control of wired and wireless networks from a common console for streamlined operations
|
● Simplifies and centralizes configuration and management of wireless and wireline devices. Supports WLAN services without requiring a wireless LAN controller
|
|
Remote configuration and management to keep local IT staff lean
|
● Supports separate console, auxiliary, and USB ports
|
|
● Provides one USB 2.0 flash memory
|
|
Supported SFP Types on the Cisco 892F Series and Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F
|
|
GLC-LH-SM
|
1000BASE-LX/LHSFP transceiver module for MMF and SMF, 1300-nm wavelength, dual LC/PC connector
|
|
GLC-SX-MM
|
1000BASE-SXSFP transceiver module for MMF, 850-nm wavelength, dual LC/PC connector
|
|
GLC-ZX-SM
|
1000BASE-ZXSFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector
|
|
GLC-BX-D
|
1000BASE-BX10SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength, single LC/PC connector
|
|
GLC-BX-U
|
1000BASE-BX10SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength, single LC/PC connector
|
|
GLC-T
|
1000BASE-T standard
|
|
GLC-GE-100FX
|
Cisco 100BASE-FX SFP for Gigabit Ethernet SFP ports with Multimode Fiber-optic (MMF) link
|
|
GLC-FE-100LX
|
Cisco 100BASE-LX10SFP with single-mode fiber-optic (SMF) link
|
|
GLC-FE-100BX-U
|
100BASE-BX10-U SFP module for 100-MB ports, 1310 nm TX/1550 nm RX wavelength, 10 km over
|
|
single-strand SMF
|
|
GLC-FE-100BX-D
|
100BASE-BX10-D SFP module for 100-MB ports, 1550 nm TX/1310 nm RX wavelength, 10 km over
|
|
single-strand SMF
|
|
CWDM-SFP-1470=
|
Cisco Coarse-Wavelength Division Multiplexing (CWDM) 1470-nm SFP Gigabit Ethernet and 1G/2G fibre Channel
|
|
GLC-LH-SMD*
|
1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength
|
|
GLC-ZX-SMD*
|
1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector
|
|
GLC-EX-SMD*
|
1000BASE-EX SFP transceiver module for SMF, 1310-nm wavelength
|
|
*Not supported on the Cisco 892F
|
|
Rack Mount Kit for 890
|
Rackmount kit for all 890s, except C891-24X
|
|
ACS-2901-RM-19
|
Rackmount kit for 891-24X
|
Inbox Zalo
